Characteristics of polycarbonate greenhouse Harvest PC

The depth of this material is 4 mm.

If you want, you are able to increase the length of the construction to 6 yards or longer. To do this, it’s enough to attach a two-meter extension. When selecting a drawing, focus on the space between the arches. This figure must be 65 cm, which is the most appropriate duration for the specified thickness of this material. The width of the doors based on the producer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it’s important to select a location because of the place. If that is done properly, you can provide yourself with a harvest of fresh vegetables for the whole calendar year.

The location for the future greenhouse is marked immediately in the preparation of this garden plot. To be able to melt the snow in the positioning of their greenhouse as early as possible, the ideal point on the website is going to be a small elevation. Furthermore, in this place is not going to need to worry about substantial humidity as soil and atmosphere inside the building.

Build a polycarbonate greenhouse in an elevated site – intends to take care of the optimal temperatures indoors.

When it isn’t possible to place a greenhouse on an elevated position, you’ll have to pour a layer of fine shattered rock about 20 cm and the identical layer of fertile land to make seedbeds.

Before building a greenhouse in your garden plot, it’s also wise to consider where and how this structure is going to be installed. To begin with, you must choose a place for it. The greenhouse ought to be found in a metropolitan region no less than a couple meters away from houses, barns and other structures.

The best way to Put in a greenhouse according to the Surfaces of the world

Be sure to level the dirt surface – it’s best to remove the top layer. This can also get rid of weed seeds. And for ease of work, remove the soil in a place that is about a meter wider on both sides of the rectangle you desire.

It’s also worth considering having a foundation. As producers state, today most greenhouses do not need that, particularly if they (greenhouses) are used only in the spring and summer period. But, seasoned anglers still recommend making at least an elementary basis from a pub. It is very simple – it’s sufficient to connect with each other using metal corners and screws four parts of wood with a cross-section of at least 10 * 10 cm. The dimensions of such a base ought to be equal to the foundation of their upcoming greenhouse.

Simple bar base

You could also earn a strip base of concrete. He’s more dependable than a pub foundation, but demands greater financial and labor costs. Incidentally, the greenhouse, which is utilised in winter, with no and do not do with it at all.

Stages of the formation of a strip base: a schematic representation

Many manufacturers counsel to set up greenhouse structures without even building a base. For this use, they equip the frame with specific T-shaped legs, so the structure was securely fixed. However, as practice shows, it’s still required to build a base: therefore and the basis will be more rigorously fixed and also the elements of the foundation in contact with the soil, will be stored much more in its original condition.

The principal thing is to take care of the material with specific agents to protect the wood from moisture. The material is normally installed on concrete blocks that are dug into the soil. For a six-meter structure, they need 10 bits: four on each side and one in the center of the endings.

Before you perform the greenhouse itself, you want to pick the ideal location for this. It has to be an even website, so the frame was found equally, without distortions. It should be sunny and not obscured by trees or buildings.